Call for pricing on arches.
 

Double/Double Notch Curve   Curved Bow Front                Top Down View Radius End   Bow Front       Double Notch Curve on each end   Notched Radius Corners       See Edge Details Below

Draw-tite hardware Miter Other corner configurations may only require draw-tite hardware        Undermount sink cutouts   Drop-in sink cutouts or stove cutouts             Click thumbnails to Enlarge Deep ogee edge detail     This is our options for ogee edge on our different wood thicknesses: Round Over Edge Picture shows close up but not actual representation of standard round over. Standard round over is either 1/8” or ¼” radius which rounds off the top edge only Mandatory crating fees: $40 for UPS (up to 72x25) Mandatory crating fees: $85 for freightable items (any size larger than 72x25) Multiple tops of the same width can be put in same crate to save crating fees. If you are able to cut to size yourself you will save by ordering the standard size blanks listed above. All modifications below subject to labor, engineering, and tooling fees.  Call, fax, or e-mail for pricing outside standard rectangles shown on grid. Arch $185 .00   Drop in Sink Cutout $90.00   Undermount Sink Cutout $250.00   Miter Cut $75.00   3/4" Ogee Edge $8.00 linear ft   Round Over Edge $6.00 linear ft   Deep Ogee Edge   $15.00      Free shipping for standard sizes with only the above crating fees applying.  For any custom or customized prices call 866-442-5625, fax 509-925-2923, or email: 1oldworld@kvalley.com Standard ground shipping is free! Please note: Unfinished tops void warranty, sinks in oil finish tops void warranty, grain running the short direction voids warranty except for 24x25, 18x25 & 12x25 standard sizes. Lead times at the point of order are not guaranteed. FREIGHT & RETURN POLICY: Inside delivery is not available with any freight company. In the event of freight delivery it is the responsibility of the customer to get the freight off the truck regardless of the weight. You may add a lift gate delivery at your expense or have friends over to help. Please note issues resulting from freight are less than 3% annually. It is the responsibility of the customer to note any damage on the bill of lading and refuse it. Any top damaged and refused in shipping will be replaced but lead times are similar to original lead time. Freight companies refuse to cover damaged freight on concealed damage so it is imperative to inspect before signing for it and refuse it if damaged. When bill of lading is signed it notes that freight is received in good condition, therefore not broken and not eligible for replacement or refund. If you (the customer) should decide to fix the top (pictures are required) a reasonable amount agreed upon by both parties not to exceed 25% of the value of the top may be refunded to you. Customer is responsible for all repairs at that point. Warranty, repair, or replacement is not to exceed value of original invoice in any situation. Freight handlers do not represent Old World nor do we represent them. Old World is not liable for any damages caused by freight companies beyond replacement of product. In the event of any warranty issue Old World is only liable for the cost of original invoice. If you are one of the 3% please realize that accidents happen and we will all do our best to remedy the situation if we all do our part. There are no returns on custom items unless product does not meet WRITTEN specifications, nothing is assumed or implied. In the case that Old World made a mistake according to written specs the top must be returned at Old Worlds expense and fixed or replaced. Customer is responsible for repackaging item for safe return. Old World is not responsible for any expense beyond original invoice in the case of product not meeting written specifications. Color, warping and windshake are not warranty issues. Coloration of wood is natural while warping and windshake are both normal conditions and fixable. Returns are only accepted on stock sizes (not modified in anyway). Product must be returned at the expense of the customer and a 20% restock fee is applied. If product is returned it must be returned in good condition before any refund is applied. All customers are subject to these policies. If you buy from someone who only wraps in cardboard you will receive this. Click to Enlarge But if you buy from us you will receive this. Click to Enlarge All other custom cuts call for a quote